ProTec Plus HybridSeries, Руководство пользователя

Страница: 65 / 172

for you to control the device via the special keyboard. Transparent COM (adapter) is
to connect to the PC to transfer data directly. Protocol COM is for card overlay
function. Network keyboard is for you to use the special keyboard to control the
device. PTZ matrix is to connect to the peripheral matrix control.

Baud rate: You can select proper baud rate.

Data bit: You can select proper data bit. The value ranges from 5 to 8.

Stop bit: There are three values: 1/1.5/2.

Parity: there are five choices: none/odd/even/space mark.
System default setup is:

Function: Console

Baud rate:115200

Data bit:8

Stop bit:1

Parity: None
After completing all the setups please click save button, system goes back to the previous
menu.
Figure 5-8
5.3.5 Network
Here is for you to input network information. See Figure 5-9.

IP address: Here you can input IP address.

DHCP: It is to auto search IP. When enable DHCP function, you can not modify
IP/Subnet mask /Gateway. These values are from DHCP function. If you have not
enabled DHCP function, IP/Subnet mask/Gateway display as zero. You need to
disable DHCP function to view current IP information. Besides, when PPPoE is
operating, you can not modify IP/Subnet mask /Gateway.

TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

RTSP port: Default value is 554.

Max connection: system support maximal 20 users. 0 means there is no connection
limit.

Preferred DNS server: DNS server IP address.