Radio Displays
What It Means
What To Do
VOX
Lets you use the radio hands free with a headset.
Recommended for advanced users only.
If this function is on, there are probably other settings that
are incorrect and it’s easier to start over.
Follow the Master Reset procedure above.
LOW
The radio is set to Low Power. This makes the battery
last longer, but may cause others to have problems
hearing the radio.
Set power to HI — press Menu three times. Using the
arrows, switch to “HI”. Press Mon.
DQT
You set the QuietTalk code between 39 and 83
Nothing, as long as the other radios have the same
QuietTalk code.
PRIVACY
The Privacy Talk function is on. Only radios showing
“privacy” will talk to each other
Turn Privacy off by pressing Menu twice. Use the arrows
to switch to “OF”. Press Mon.
Battery symbol
Shows the amount of charge remaining. If flashing, then
the battery power is low.
Charge the battery if flashing
Wavy Vertical
Lines symbol
The Incoming Call Notification is set to vibrate.
Recommended for advanced users only.
If this function is on, there are probably other settings that
are incorrect and it’s easier to start over.
Follow the Master Reset procedure above.
Key symbol
The radio is locked and settings cannot be changed
See SuperLock below.
Displays
Trouble Shooting
You consistently hear people from other businesses —
change the either the frequency or the QuietTalk code for each of your radios
The radio doesn’t seem to work after you’re sure the frequency and QuietTalk code are set correctly —
follow the Master Reset
procedure above, then set the frequencies and QuietTalk codes to match your other radios.
You can hear other radios, but they can’t hear you —
Is the battery fully charged? Check the QuietTalk code, is it set to the same number
as another working radio? (see previous page) Is the privacy feature turned on? (see “Displays” PRIVACY” above)
Can’t change the frequency or QuietTalk code —
Is the radio is locked? (see “Key symbol” under ”Displays”, or “SuperLock” above)
Battery won’t charge —
Is the charger plugged in at the wall and the charger cup? Try another charger. Is the
battery installed properly? (You should see a silver sticker with arrows pointing toward the antenna when battery is installed properly.)
What To Do
What the Radio Does
What It Means
1. Turn the radio off and place it in the palm
of your left hand or on a flat surface.
Hold the radio any way that is comfortable. Most people
find holding the radio this way is the easiest way to do
this procedure.
2. Press and hold the Up and Down arrows
with your left thumb. Press and hold Mon with
your right thumb.
You don’t have to use your thumbs, just make sure to
press and hold all three keys.
3. Continue to hold the keys above and turn
the power on
Displays
rE St
Most people use their right index finger, but you can use
any part you want.. The reset is done.
4. Release the Up and Down arrows and
Mon button
Displays a large
1
Radio is back to the original factory settings. Now set the
frequency and code to match your other radios.
Master Reset
Returns the radio to the original factory settings. Do this if you are having trouble getting the radios to talk to each other.
What To Do
What the Radio Does
What It Means
1. Turn the radio on while pressing PTT and
Cal buttons at the same time. Hold for two
seconds
Displays
SL-
Of
or
SL-
On
Super Lock is turned on or off.
2. Press the Up or Down arrow to turn
Super Lock off or on
Displays
SL-
and a flashing
Of
or
-
On
3. Press the PTT button to set selection.
Beeps twice and displays
numbers
The large number is the current channel.
The smaller number is the current code.
If a key symbol is also displayed, then SuperLock is on.
Super Lock
Locks the Menu, Call, Up or Down keys to stop unintentional changes to channels, QuietTalk codes or selections in
the Menu area. Use the procedure below to turn off or turn on.
DO NOT TURN ON UNTIL YOU HAVE CONFIRMED THAT THE RADIO IS
SET THE WAY YOU WANT IT AND IT TALKS WITH YOUR OTHER RADIOS
. Available on radios with serial number 41200001 and higher.