49
MARK76X1001 Rev 6
Reading the hour counters and software
Status menu
Hold the , and buttons for 5 seconds.
You now see the ‘Quick status menu’.
The hour counters and software versions can be viewed here.
Resetting the hour counters
Navigate to ‘2. Lamp hours’ or ‘3. Facial tanner hours’ and press .
Enter the PIN code and press .
The hour counters are reset.
Maintenance
Cleaning
The tanning appliance is equipped with a touch panel control. To prevent
accidental operation of the machine during cleaning, you can temporarily
switch off the control. It is also recommended that you temporarily switch off
the control before you open the acrylic screen canopy.
Hold and for 5 seconds.
The display shows the remaining time + ‘Cleaning’. During this period the
display cannot be operated.
The time you have to clean the machine can be changed. The standard
cleaning time is 1 minute.
Cleaning the air conditioning (option)
Clean the air conditioning as explained in the instructions that accompanied
your air conditioning unit.
You must reset the service date after cleaning.
To reset the service date while a fault message is displayed, press to enter
the ‘Quick status menu’. From the standby screen, hold the , and
buttons for 5 seconds to enter the ‘Quick status menu’.
Navigate to ‘Airco service date’ and press .
Enter the PIN code and press .
The airco service date is increased by 6 months.
Replacing the Qsens (option) liquid jug
Never refill your Qsens liquid jug with regular tap water or any other liquid.
Replace with an original Hapro Qsens liquid jug. Remember to order the
Qsens liquid jugs in time.
Before Qsens can be used for the first time or after replacement of the liquid
jug, the system must be bled of air.
Hold the , and buttons for 10 seconds.
Enter the PIN code; it is set to 0000 by default. Press
to confirm. You are
now in the parameter menu.
Navigate to ‘09 - Qsens’ and press .
Navigate to ‘03 - Qsens initialization’ and press .
Press to start the initialization.
Wait until the Qsens nozzles produce a fine mist of water.
Press to stop the initialization.
Press to exit the parameter menu. Your Qsens set is now ready for use.
Содержание Luxura X10/Vegaz 52
