KEXT300 User Manual Rev 1.3
- -
11
OSD Menu/System Page
The
System
page allows you to set the hotkey, the OSD timeout, the Logout time, the password and to toggle
the extender into the Firmware Upgrade mode.
Hotkey:
select the hotkey from among: Scroll; Cap; Num; F12; Esc
OSD Timeout:
Disable / Enable the OSD timeout (5~30 sec)
Logout Time:
Disable / Enable the Logout timeout (1~30min)
Firmware Upgrade:
Enter into firmware upgrade mode
Set the new password:
Set up new password
To set up a new password, first type in the old password and then type and retype to confirm your new
password.
Save, Load and Load Default
Users can save the current configuration of the CAT5 KVM extender into the unit itself, only for later upload
in case they need to restore the previously saved configuration.
Save:
To save the current configuration, highlight
Save
into the System page and press <Enter>.
Load:
To load the previously saved configuration, highlight Load into the System page and press <Enter>. A
prompt appears to caution you for an overwrite on the current settings. Highlight Yes and press <Enter>.
Default
: To restore the settings to factory default, highlight Default into the System page and press <Enter>.
A prompt to caution you for an overwrite on the current settings. Highlight Yes and press <Enter>.
