DSNET USER’S GUIDE
20
3.8
SETTING UP THE MONITORS
Click on any of the monitor icon and select
Properties…
Click on the
Audio Video
tab.
Check or
uncheck
Video ON
to turn the video ON
or OFF. When the video is off, the monitor
displays a black screen; however it is not powered
off.
Check or uncheck
Audio ON
to turn the audio ON
or OFF.
Use the slide bar to adjust the audio
volume.
Note:
The audio settings apply to both monitors.
Since monitors attached to the same receiver are
supposed to be close to each other, it is not
necessary to have independent audio settings.
If your monitors have a serial attachment, click on the
Connection
tab. Chose the data rate and specify if
the connection is bidirectional. The data rate can be different from the Player serial interface data rate.
Under the
DDC tab
you can capture the monitor
DDC information and send it to the Broadcaster.
Under certain operating systems, personal
computers need to get the DDC information
provided by the connected monitor in order to
adjust their video settings in accordance with
the monitor capabilities. Without this
information they use a default model that
may prove to be very restrictive.
The Broadcaster will record this captured data
and will use it for its DDC emulation, so that the
Player behave exactly like if it is directly
connected to the selected monitor.
Figure 11: Monitor Audio/Video Settings
Figure 12: Capture and Send Monitor DDC Information
