22
Installer Guide
Static Cool Setpoint
(Setup Step 89)
Static Heat Setpoint
(Setup Step 90)
Specifies the setpoints that will come into use during an event when the PRICE
DEPENDENT ACTION is set to OBSERVE STATIC SETPOINT
Cool Setpoint Offset
(Setup Step 91)
Heat Setpoint Offset
(Setup Step 92)
Specifies how much the current setpoints in effect prior to an event will be altered
during an event when the PRICE DEPENDENT ACTION is set to OBSERVE SETPOINT
OFFSETS. The heat setpoint can be automatically lowered by 1 to 10 degrees while the
cool setpoint can be automatically raised by 1 to 10 degrees.
DISPLAY INDICATIONS WHEN AN ADR EVENT IS HAPPENING
After setting your desired values for use during an ADR event, the scrolling display will
give a little information when an event is pending or active. For instance, when an ADR
event has been sent to your thermostat, you might see ADR STARTS at 4:15 to notify
you of a pending event. Once active, you might see ADR STOPS at 5:30. If you have
configured a threshold for cost of energy past which you want to trigger an event, you
will see PRICING EVENT on the display. When an event is active, you can press any of
COOLER, WARMER or
MODE buttons, followed by the WARMER to opt out of the event.
Press Fan To Clear All Messages
(Setup Step 93)
This feature allows the user to clear all current error messages from the display.
PSP4273_Installer man.indd 22
PSP4273_Installer man.indd 22
6/9/21 11:23 AM
6/9/21 11:23 AM
