User Guide
P. 5
Remote Valet Operation
The system can be placed in or out of valet mode through the remote control. This means that the user does
not have to enter the vehicle or switch the key to the RUN position to get in or out of valet mode.
To remotely place the system in or out of valet mode:
•
Press and hold
+ buttons simultaneously for 3 seconds on the transmitter; the system will
toggle in and out of valet mode:
o
Getting into valet mode, the parking lights will flash 3 times, the LED will come on and
remain lit.
o
Getting out of valet mode, the parking lights will flash twice, the LED will go out.
Parking Lights Flash Rate
FLASHES
RATE
DESCRIPTION
1
Quick
Locked by transmitter, system armed, starter kill armed
2 Quick
•
Unlocked by transmitter, system disarmed, starter kill disarmed
•
System has exited valet mode
3 Quick
•
Locked by transmitter while a door opened
•
System has entered valet mode
5
Quick
New transmitter programmed
8
Quick
Unit reset: Occurs when the unit is reset to factory defaults