Prostage Controller Pedal XCC BlackLine, Руководство пользователя, Страница: 5 / 12

Main PCB
Switch 1-7 Chooses the commands to be sent. (see 4.1 and 4.2)
Switch 8 Chooses between Control Change / Aftertouch or Pitch Bend
OFF = The Pedal sends Control Change commands according to
the table on pages 6-9. If Control Change number 120-127
is selected, the Pedal sends monophone aftertouch.
ON = The Pedal sends Pitch Bend according to table on page 10.
Jumper
Chooses the working direction of the Pedal
OFF = Pedal down => hi value (127)
Pedal up => low value (0)
ON = Pedal down => low value (0)
Pedal up => hi value (127)
=> Default setting is “Volume” (Controller # 7) sent on MIDI channel 1.
4.1 Operating mode “Control Change / Aftertouch”
If DIP-switch 8 is set to “OFF”, the Controller Pedal XCC sends Control Change
commands according to the table on the following 4 pages. If you set a Con-
troller number between 120 and 127, the XCC sends monophone Aftertouch
instead of Control Change commands.
Switch 1-7
Chooses the Controller number according to the following list:
8 DIP switches
on the Main PCB
4 DIP switches on
the Decoder PCB
Jumper