ProSoft RadioLinx RLXIB-IHW Скачать руководство пользователя страница 4

 

 

IMPORTANT: 

This device is a 2.4-GHz, low-power RF device intended for office and home use in all EU and EFTA 

member states, except in France where restrictive use applies. 

EU Requirements 

1. For outdoor use, France has a frequency restriction of 2.4GHz - 2.454GHz for an output power greater than 10mW 
and below 100mW. 
2. For outdoor use in France, the output power is restricted to 10mW in the frequency range of 2.454GHz – 
2.4835GHz. 
3. 5.15GHz – 5.35GHz is restricted to 200mW EIRP throughout the European Union.  

RLXIB: Power over Ethernet Injector and Accessories "Warning" 

The PoE Injector was not a part of the hazardous location or ATEX certification. Therefore, if an injector is used to 
power any of the radios, the PoE injector must be installed/located outside of any area that could be known to be 
hazardous. The AC power adaptor was not a part of the haz loc certification. 

The RLXIB series were tested and certified to hazardous location and ATEX without any accessories included in this 
certification. Therefore, any accessory added to the RLXIB series radios must be used in an area known to be non-
hazardous as they have not been subjected to hazardous location and ATEX certifications.  

The preferred method of powering the radios is using the supplied power adaptor but If the PoE injector is used in an 
ordinary location "only", the PoE injector must be Listed. If the PoE injector is used instead of the supplied power 
adaptor, all of the wiring to and from the injector must be routed/installed inside building/plant  and never 
routed/installed outside of the building/plant.  

Your Feedback Please 

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments, 
compliments or complaints about the product, documentation, or support, please write or call us.  

ProSoft Technology

 

5201 Truxtun Ave., 3rd Floor 
Bakersfield, CA 93309 
+1 (661) 716-5100 
+1 (661) 716-5101 (Fax) 
www.prosoft-technology.com 
[email protected] 

Copyright © ProSoft Technology, Inc. 2009. All Rights Reserved. 

RLXIB-IHW Setup Guide 
September 16, 2009 

ProSoft Technology 

®

, ProLinx 

®

, inRAx 

®

, ProTalk

®

, and RadioLinx 

®

 are Registered Trademarks of ProSoft 

Technology, Inc. All other brand or product names are or may be trademarks of, and are used to identify products 
and services of, their respective owners.  

ProSoft Technology

®

 Product Documentation 

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments. 
User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided on the enclosed CD-ROM, 
and are available at no charge from our web site: www.prosoft-technology.com 

Printed documentation is available for purchase. Contact ProSoft Technology for pricing and availability. 

North America: +1.661.716.5100 
Asia Pacific: +603.7724.2080 
Europe, Middle East, Africa: +33 (0) 5.3436.87.20 
Latin America: +1.281.298.9109 

 

Содержание RadioLinx RLXIB-IHW




















Отзывы: