MVI56-DEM
♦
ControlLogix Platform
Diagnostics and Troubleshooting
Honeywell DE Communication Module
Page 32 of 80
ProSoft Technology, Inc.
March 6, 2008
4.1.5 Main
Menu
When you first connect to the module from your computer, your terminal screen
will be blank. To activate the main menu, press the
[?]
key on your computer's
keyboard. If the module is connected properly, the following menu will appear on
your terminal screen:
Caution: Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
Selecting a Channel
These commands select the current channel for use with the commands. After
you select a channel, press
[R]
(show channel data),
[S]
(show status data) or
[W]
(show write data) o view information for the selected channel. The following
table shows the relationship between the commands and the channel numbers:
Press This Key
To Select This Channel
0 Channel
1
1 Channel
2
2 Channel
3
3 Channel
4
4 Channel
5
5 Channel
6
6 Channel
7
7 Channel
8
8 Channel
9
9 Channel
10
A Channel
11
B Channel
12
C Channel
13
D Channel
14
E Channel
15
F Channel
16
