Configuration Commands
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 75 of 111
May 29, 2009
10 Configuration
Commands
In This Chapter
Info (Information) ................................................................................... 75
Status .................................................................................................... 77
Common................................................................................................ 79
Cellular .................................................................................................. 99
The configuration commands (AT commands) in this chapter are arranged
according to their placement in AceManager.
Note:
Some commands can only be configured using a terminal emulation and typed AT
commands. Some commands also require PassThru mode.
Tip:
You can use a fully qualified domain name instead of an IP address for most configuration
options calling for an IP address if your RLXIC-EH is configured to use DNS. DNS settings
frequently come directly from your cellular provider while your RLXIC-EH is registering on the
cellular network, and receiving its IP address.
10.1 Info
(Information)
The commands in the "Info" group have read-only parameters. They only provide
information about the modem. Some of the information displayed in this group
does not correspond directly to AT commands.
Содержание RLXIC-EH
Страница 4: ......