3170-PDP Installation Guide
4
STATUS Indicator
Indication
Status
OFF
No power
Solid Green
Normal operation
Flashing
Red/OFF
Recoverable fault
- Flex I/O module defective
- Incorrect Flex I/O
module installed
- Node address changed since
power up
Solid Red
Unrecoverable fault
PROFIBUS Indicator
Indication
Status
OFF
No power or no communication
Solid Green Data is being transmitted and
recieved
Flashing
Red/OFF
Recoverable fault
- Invalid Send Parameter data
- Invalid Check Configuration data
Solid Red
Unrecoverable fault
- Unable to communicate
3170-PDP Specifications
3170-PDP Flex I/O Profibus
Adapter Specifications
I/O Capacity
8 modules
Input Voltage Rating
24V dc nominal
Input Voltage Range
19.2V to 31.2V dc (includes 5% ac
ripple)
Communication Rate
All rates up to 12Mbit/s
Indicators
STATUS LED - red/grn
PROFIBUS LED - red/grn
Flexbus Output Current
640mA maximum @ 5V dc
Power Consumption
400mA maximum from external 24V
dc supply
Power Dissipation
7.68W maximum @ 19.2V dc
Environmental Conditions
Operational Temperature
Storage Temperature
0 to 55oC (32 to 131oF)
-40 to 85oC (-40 to 185oF)
PROFIBUS Connector
9-pin D-shell
PROFIBUS Drop Cable
Standard drop cable
Power Conductors
Wire Size
Category
12 gauge (4mm2) stranded maximum
3/64 inch (1.2mm) insulation max.
21
Agency Certification
(when product or packaging is
marked)
•
CE marked for all applicable
directives.
•
PNO
1
Use this conductor category information for planning conductor routing. Refer to
publication
1770-4.1, “Industrial Automation Wiring and Grounding Guidelines."
Set the Node Address
Set the node adress using the2-position pen-push switches. Use a
ball-point pen to press either the + or – buttons to change the
number. Valid settings range from 00 to 99
Network
Address
Switches
Note
The adapter automatically sets the baud rate at power-up.
STATUS Indicator
(gree/red)
PROFIBUS
Indicator
(green/red)
LED Indicators
