X 10
X 2
Installation (continued)
13 PROSLAT.COM
Please contact 1 888 GATOR-08 for further assistance.
6
Install the hand control switch holder
□
Secure the hand control switch to a convenient location on the closest
appropriate wall using the power cord cable clamps (E) and screws (V and W).
□
If your cables are too long, use the supplied cable ties to coil them close to the
motor for a clean finish.
□
To prevent unauthorized use, the Garage Gator hoist is equipped with a key lock
feature. When the key is turned to the “OFF” position or removed from the hand
control switch the unit will not function until the key is reinserted and turned to
the “ON” position.
Screw into wall
Power cord cable clamps
Screw into wall
Insert supplied key here
TIP: WE SUGGEST YOU INSTALL YOUR
CONTROLLER HOLDER FIRST AND RUN YOUR
WIRE BACK TO THE MOTOR. THIS WAY YOUR
EXCESS CABLE WILL BE UP AT THE MOTOR.
USE THE SUPPLIED CLIPS TO ATTACH TO
THE WALL.
