Pro'sKit SS-820B, Руководство пользователя

Страница: 12 / 28

OPERATION GUIDELINES
1
2
3
4
Remove the lid, put the items in the basket then put
them in the cleaning tank. Add water to a level between
MIN and MAX and above the area to be cleaned.
If the unit is turned on without water, ultrasonic
energy will not be absorbed. Once over 30 seconds,
it may damage the unit or severely reduce the life
of the unit.
Connect the power cord to an outlet.
LED display shows . This is the most common
timer setting and working state.
If the timer needs to be adjusted, press SET button and
button. The timer can be set between 1 to 30 minutes.
Common cleaning times are 5, 10 or 15 minutes.
Prolonged cleaning time may result in:
a. Loosening of the screws if used.
b. Increasing the pre-existing cracks.
c. Peeling of coating which was already separated.
Press On/Off button to start cleaning.
During cleaning, buzzing sound can be heard from the
cleaning tank, indicating the cleaning is underway.
Closing the lid will reduce the noise level.
LED display will count down to show the remaining
cleaning time. When it displays
00:00
, the cleaning is done.
To stop cleaning at any time, press On/Off button.
The unit is designed with overheating protection to avoid
extended and continuous operation for too long.
When the red light is on, the unit will not turn on even it
is forced to. The unit will idle for about 20 minutes and
can be restarted after the green light comes on.
Select one of the four cleaning methods recommended earlier.
a. When the heater is needed, press TC button, flashes,
indicating the heater is turned on.
When water temperature reaches 60ºC (140ºF) the heater
will be turned off automatically.
To ensure safety, the unit is designed with dual protections.
The heater will be turned off automatically if it has been
running for 45 minutes.
b. To speed up the mixing when solution is used, degas
function can be used. Press SET button to set the timer.
Press Function button, illuminates. Press On/Off to
start degassing. It changes over to normal cleaning after
90 seconds.
C. When debris “smoke” is no longer visible, cleaning is done.
If additional cleaning is needed, press SET button to reset
the timer and repeat the steps above.
10