3X Desk Type Magnifier
MA-1003
Thank you very much for purchasing Pro’skit 3X Table Bracket Magnifier Workbench Lamp. The
3X Table Bracket Magnifier Workbench Lamp is ideal for precise work in home, office and workshop as
well as a lot of other important places. Before using the Magnifier Lamp, please read the following
instructions.
1. Specification:
1) Lens material: glass
∮
100mm (4”)
2) Dioptre: 3 dioptre / 12dioptre
3) Light source: AC 120V 60 Hz / AC220-240V AC 50Hz T4 G10q 12W circular
fluorescent lamp
4) Supplied with electronic ballast
5) Product size: Base: 18*15cm,Height37.0cm
2. How to use:
1) Before use, remove all packing from around the lamp.
2) Put the lamp on the horizontal table.
3) Insert the plug into a conveniently located electrical socket.
4) Switch on using the ON/OFF switch located on the surface of the base.
5) To place the head in the desired position.
3. Replacing the Tube:
1) Always switch off, remove the plug from the mains supply and allow the lamp to cool
before changing the tube.
2) Rotate the head so you can see the underside. Using a suitable screwdriver remove
the five small screws that secures the diffuser to the head of the lamp.
3) Remove the diffuser and place safely to one side.
4) Remove the tube from the head and gently unplug the 4-pin connector-discard the
old tube safely.
5) Gently push-fit the 4-pin connector onto the new tube ensuring it is pushed on fully.
6) Position the new tube into the head, replace the diffuser and tighten the 5 screws to
hold it in place.
4. Caution for safe using:
1) Indoor use only.
2) Environment temperature: -20
°
C~40
°
C.
3) Humidity:
≤
95%.
4) Never disassemble the magnifier lamp unless you are a qualified electrician.
5) Plug must be taken out while repairing the magnifier lamp.
6) Never leave the lens unattended in direct sunlight or where light can shine through it.
This constitutes a fire hazard.
3X
桌上型工作燈
MA-1003
非常感謝您購買
Pro’skit
的
3X
放大鏡燈，放大鏡燈就像在家中、工作室、或辦公室一樣是
具有相當的重要用途，在使用放大鏡燈前，請閱讀下列指示：
1.
規格
1)
鏡片材料
:
玻璃
∮
100mm (4”)
2)
倍光率
: X3
倍光率
/ 12
倍光率
3)
光源
: 110V-120V / 220V-240V AC 50Hz T4 G10q 12W
環型燈管
4)
採用電子式啟動器
5)
產品尺寸
:
底座
: 18*15cm
高度
37.0cm
2.
如何使用
1)
使用前，請先除去放大鏡燈之外的包裝。
2)
將放大鏡燈放於水平桌面上。
3)
將插頭插入電源插座。
4)
打開底座上方的
ON/OFF
開關。
5)
將燈頭移至正確使用的位置。
3.
更換燈管
1)
在更換燈管之前，將開關關閉，並拔出插頭使燈管冷卻。
2)
旋轉頭部然後你就能看到底部，並使用適當的螺絲起子去轉開位於頭燈，並有
5
顆螺絲的
燈罩。
3)
安全地將燈罩移至旁邊。
4)
從頭部移動管線，並小心地除去舊管線中具有
4
支腳連接器。
5)
將新的燈管插上連接器並逐步裝妥。
6)
在頭部放入新的管線，拴緊
5
顆螺絲而能適當地支撐更換燈罩。
4.
安全指標
1)
室內使用。
2)
環境溫度
: -20
℃
~40
℃
。
3)
溼度
:
小於等於
95%
。
4)
除非你是位合格的維修工程師，否則不要任意拆解放大鏡燈。
5)
當放大鏡燈修理時，請務必將插頭拔離插座。
6)
絕對不要將鏡片至於日光或其他光源能穿透的地方，會導致火災發生。