ProsKit 15-AT002, Руководство пользователя

Страница: 11 / 24

10
6.2 Low Battery LED:
The power LED should slimming. If it does,
replace the battery.
6.3 No connection LED/Single Beep
If the Remote is not connected to the main
unit with a cable, or the cable has no intake
conductors, the No Connection LED with light
and the Beeper will sound once.
6.4 Connected LED/lo-Hi Beep /Numbered
LEDs
If the Connected LED lights and the Beeper
emit a Lo-Hi beep, examine the numbered
LEDs (i.e. LEDs numbered to 8 and the S
LED). Corresponding to the type of cable
being tested must light .Examine the table
below the Numbered LEDs, noting what
LEDs should light .If all of These LEDs do not
light; the cable has an OPEN fault. If all of the
appropriate Numbered LEDs light, the cable
is OK.
Note:
When testing an RJ-45 UTP cable, the S LED
must not light.
The 4 in 1 is intended to test complete cables. It
may not find faults in cables that are intentionally
incomplete. For example, the standard EIA/TIA
568 RJ-45 terminated Ethernet cables is
expected to contain 8 conductors. If only 4
conductors are used between the RJ-45
connectors. The 4 in 1 may not properly identify
the faults.