VDSL LAN Extender
User Manual, V100
Page: 5
Chapter 2 Hardware Installation
This chapter shows the front panel and how to install the hardware.
2.1 Front Panel
Please see the side view below configure 2.1:
Front panel can be separated into five parts from left to right:
(1) DIP switch
(2) RJ-45 connector for Ethernet
(3) LEDs for Ethernet
(4) LEDs for VDSL
(5) RJ-45 connector for VDSL
1.
The RJ-45 is designed to connect to the Local Network with the Unshielded
Twisted Pair (UTP) cable. The LEDs on top of RJ-45 connector show the status
below:
LED for
Ethernet
Blinking
On
Off
Activity
Link UP
Link Down
100Mbps
10Mbps
Full Duplex
Half Duplex
