Proscend 5210D, Руководство пользователя

Страница: 37 / 61

G.SHDSL.bis Bridge Modem 5210D User Manual V0.01 36
This is the default supervisor ID and password is
“
root
”. It is highly recommended that you change
these for security purpose.
Supervisor ID : Type the new ID
Supervisor Password : Type the existing password (
“root” is the default password when shipped)
Password Confirm : Retype your new password for confirmation.
Telnet Port : For using Telnet, you may change the default service port by typing the new port
number. If you change the default port number then you will have to let user who wish to use the
service know the new port number.
On trust host list, configured 0.0.0.0 will allow all hosts on Internet or LAN to access the modem.
Leaving blank of trust host list will cause blocking all PC from WAN to access the modem. On the
other hand, only PC in LAN can access the modem.
If you type the excact IP address in the filed, only the host on this listing can access to the modem.
Click Finish to finish the setting.
The browser will prompt the all configured parameters and check it before writing into NVRAM.
Press Restart to restart the gateway working with the new parameters and press Continue to
setup other parameters.