No power
No sound.
Troubleshooting
knob clockwise.
Noisy sound:
Radio:
Tune the station properly.
Turntable:
Not playing or sound distortion
Rising the volume level by turn the Power ON/OFF - VOLUME
RADIO position.
The Function selector is in wrong position, turn it to
Relocation the unit.
The Function selector is in wrong position, turn it to
AUX/PH position.
Loosen the screw, and take out the stylus guard.
(The stylus guard is a white plastic cover that protects the
stylus during
transportation.)
Select the correct playback speed.
The unit is too close to a TV set or similar appliances.
Relocate the unit.
Check the connection of AC wall outlet.
Can not listen to any station, or signal is too weak.
If you experience any problems with the unit, please take a monent to look through this chart and see if you can
solve the problem yourself before you call your dealer.
Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft cloth or
liquid completely. Do not use thinner, benzine or alcohol as
of the unit to dry completely before using.
Maintenance:
18
use a diluted mild
liquid soap. Be sure to remove any excess
unit. Allow the surface
CD Player
Not playing
The Function selector is in wrong position, turn to CD position.
Load the disc with the label side face up.
If the disc is dirty, clean the surface of the disc.
Try again wth another disc.
The tape has not insert completely. Insert the tape tightly until the Eject button is
ejected.
The Function selector is in wrong position. Turn it to BT/TAPE position.
If the unit is halt or abnormal operation, unplug the power cord from the wall outlet and plug it again.
Clean and demagnetize the heads.
Sound is distorted or noisy
they may
damage the surface of the
The external BT device had NOT paired to the unit
The external BT device too far from the unit
Cassette Tape Player
Not playing
Bluetooth
Not playing
The Function selector is in wrong position
.
Turn it to BT/TAPE position.
If connection fails or the pairing name does not appear, please restart the unit and switch to Bluetooth mode
and try to connect again as the instruction stated in this manual.
