ProScan PLED4897A, Инструкция по эксплуатации

Страница: 14 / 49

WALL MOUNT INSTALLATION
INSTALLING REMOVING THE BASE STAND
WARNING
/
: The LED Display is very fragile and must be protected at all times when removing t he b ase
Stand
Be sur e that no har d or sharp object or anything that could scrat ch or damage the L E D display comes into
contact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack
1 Disconnect all cables or cor ds connected t o the unit
2 Lay the unit down on a flat surface with the back side facing up Please make sure to place a soft
cushioned material such as a pillow or thick piece of foam beneath the screen
3 To remove the base stand loosen screws off the holes then pull downwards to release
the base stand
,
.
. .
. .
. ,
MOUNTING ON THE WALL
NOTE
Remove the base stand before mounting the unit on the wall.
( 400mm x 400mm) mounting kit designed for flat- panel TVs ( not supplied). Mount this unit accor ding t o
the instructions included in the mounting kit.
Length of screw should not exceed 12 mm.
11
16”
16”
M6
. .
.