ProScan 058465784027, Инструкция по эксплуатации

Страница: 14 / 27

INSTALLING REMOVING THE BASE STAND
WARNING
/
: The TV Display is very fragile and must be protected at all times when removing the base
Stand
Be
sur
e
that no har
d
or sharp object
or
anything that
could
scrat
ch
or
damage
the
TV
display
comes
into
contact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack
,
.
. .
NOTE
Remove the base stand before mounting the unit on the wall.
MOUNTING ON THE WALL
( 100mm x 100mm) mounting kit designed for flat- panel TVs ( not supplied). Mount this unit accor ding t o
the instructions included in the mounting kit.
Length of screw should not exceed 10mm.
1 Disconnect all cables or cor ds connected t o the unit
2 Lay the unit down on a flat surface with the back side facing
down.
3 To remove the base stand loosen screws off the holes then pull downwards to release
the base stand
.
.
,
. .
.
4
4
4”
4”
M6