Accessories
Grinding discs
For removing burrs, narrow cuts and
shaping of plastics,
wood, fiberglass
and soft metals. Fit
the disc between
the 2 rubber
washers and
tighten with the
locking screw.
HSS cutter
For detail engraving,
carving and routing in
wood, fiberglass,
plastic and soft
metals.
Diamond grinding point
For fine detail work, cutting, engraving,
carving, touch-up and finish, use on
wood, jade, ceramic,
glass, hardened
steel, semi-precious
stones and othe
hard mate
Engraving
r
rials.
glass;
g the compression screw.
Hold the PT-5202 mini grinder so that it
is close to vertical and move at an even
pace with a steady pressure. Pauses and
alterations in pressure will be noticeable.
Use a straight edge where possible. Try
printing a sticky label with your lettering
on it. Stick onto the item to be engraved
and trace the outline.
Grinding point
Use on metals, welded joints, rivets and
rust. Ideal for
sharpening,
de-burring, rust
removal and general
purpose on most
materials.
Grinding
The PT-5202 mini grinder is perfect for
modeling and detailing. Clamp the work
piece securely, hold the grinder firmly,
supporting your wrist and gradually work
the area. Don’t attempt to do the job in
one pass. When you need to remove
more material begin with the cutting tools
and finish with the grinding tools. For
large jobs use a larger tool.
Sanding sleeve
For rough shaping
and smoothing
wood and fiber
removing rust from
metal surfaces;
shaping rubber surfaces. Sanding bands
are easily replaceable on drums by
loosenin
9