PT-1210 User
’s Manual
www.prokits.com.tw
6
Product Features
Operation Instructions
The machine is intended for grinding and sanding wooden materials, plastic,
gypsum, non-ferrous metals and fastening elements. It is also suitable for working
soft wall tiles, as well as for dry sanding and scraping of small surfaces. It is
especially suitable for working close to edges and for flush cutting.
Insertion and Removal of Rechargeable Battery
Ensuring the correct orientation between the battery and the battery compartment,
insert the rechargeable battery into the machine. Do not apply force when inserting
the battery. Insertion can be achieved easily and without resistance. The battery
must be inserted completely until the battery automatically locks into place. To
remove the battery press pull the battery straight out of the charger.
Charging the Battery
The rechargeable battery must be charged before the first use.
The "T" mark on the battery pack aligns to the charger "T" mark, insert the battery
into the charger. Do not apply force when inserting the battery. Insertion can be
achieved easily and without resistance. The battery must be inserted completely
until the battery locks into place.
When the battery pack is in the charging status, the red light on the left side will be
illuminated. The charging time is around 1 ~ 1.5 hours. After the power is full, the
red light will turn off and the green light on the right will turn on. Before remove the
battery from the charger, please remove the charging plug first.
Gear Speed Pre-Selection
Quick release locking lever design
Battery Charger
Battery Fuel
Gauge Indicator
LED Working Light
