Proroute GEM420 4G M2M Router
GEM420 User Manual
73
the “Scan” button to get the available AP’s MAC list automatically and select the
expected item and copy its MAC address to the Remote AP MAC 1~4 one by one.
12. Remote AP MAC 1 ~ Remote AP MAC 4:
If you do not enable the Lazy mode,
you have to enter the wireless MAC address for each WDS peer one by one.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.3.1.4 WPS Setup
Once you finished the wireless settings for the following sub-sections, you can
configure and enable the WPS (Wi-Fi Protection Setup) easy setup feature for your
wireless network by clinking on the
“
2.4G WPS Setup
” button.
1. WPS
:
You can enable this function by checking “Enable” box. WPS offers a safe
and easy way to allow the wireless clients connected to your wireless network.
2. Configuration Status
: This configuration status will be “CONFIGURED” or
“UNCONFIGURED”. “CONFIGURED” means WPS connection is following WiFi
settings on this gateway. If it’s released to “UNCONFIGURED”, the WPS
11 Only one wireless client is allowed to proceeding WPS connection at the same time.
