Proroute GEM420 4G M2M Router
GEM420 User Manual
145
1. User Name
: user name of this user profile.
2. Password:
password of this user profile.
3. Authentication:
MD5 or SHA-1 for authentication.
4. Encryption:
DES is available for encryption.
5. Privacy Mode:
Three options are available for authentication and encryption.
Choose “authNoPriv” if you want to do authentication only. Choose “authPriv” if
you want to do both of authentication and encryption. If you want to make it simple,
choose “noAuthNoPriv” to deactivate authentication and encryption.
6. Privacy Key:
Enter the key for encryption. It’s only available when Privacy Mode
is set to “authPriv”.
7. Authority:
Allow this user profile to read information from device only, or change
configurations as well (read/write).
8. Enable:
Check the box to activate this user profile.
9. Actions:
Press “Edit” button to modify user profile.
3.2.5.3 Telnet with CLI
A command-line interface (CLI), also known as command-line user interface, console
user interface, and character user interface (CUI), is a means of interacting with a
computer program where the user (or client) issues commands to the program in the
form of successive lines of text (command lines). The interface is usually
implemented with a command line shell, which is a program that accepts commands
as text input and converts commands to appropriate operating system functions.
Programs with command-line interfaces are generally easier to automate via scripting.
The device supports both Telnet and SSH CLI with default service port 2300 and 22,
respectively. And it also accepts commands from both LAN and WAN sides.
