ProRacing VP, Инструкция по сборке и руководство по эксплуатации

Страница: 13 / 16

13. FAQ.
13
Q
Q: Should the ProRacing® Chip Box VP be permanently connected
to the VP37 injection pump controller?
A
A: Yes, when using the device it must be permanently connected.
When you disconnect the device, the car will return to the factory
settings.
Q
Q: Should I turn off the engine before adjusting?
A
A: Yes. In order for the ProRacing® Chip Box VP device to work
properly, each time before any adjustment the motor should be turn
off. Thanks to this, we are sure that the modification will have a
correct effect on the ECU in the car.
Q: I have an 8 pin plug at the pump, but only seven wires come out
of it. Does it affect anything?
A: No. It happens that one pin in the plug is empty. This does not
affect the operation of the device because the signal is given on
completely different pins.
Q
A