Propox CY8C21 Series, Руководство пользователя

Страница: 3 / 18

3
1. Introduction
EVBeasyPSoC
is a development board designer for the hobbyist and engineers
who want to quickly prototype their system based on PSoC microcontrollers from
Cypress. Developer has access to all pins of the micro, which are brought to the
header (pin connectors) and labeled accordingly. Depending upon the board`s
configuration (listed versions) some or all of the following components are found
on the board: thermometer, potentiometer, relay, buzzer, RTC (real time clock),
four seven-segment LED, RS232 interface,1-Wire connector, I2C connector, ISSP
connector, external FLASH memory and LCD display (2x16). The pin headers
provided allow easy access to all these components. In addition, there are eight
micro-switches and eight diodes which could be connected to any of the pin
connectors or additional components, which may be placed on the large, adjacent
prototype area. The power circuitry on board (bridge, voltage regulator) eliminates
the need for an external regulated power supply.
This board comes with the several examples of the C code routines (source from),
to facilitate testing and quick development in using the board`s resources.
Available Version
The set EVBeasyPSoC is sold in the following version:
Processor CY8C29466 or CY8C27433
All connectors
Four 7-segment LEDs,
Diodes and switches
Relay 10A LED
Buzzer
Two potentiometers
1-Wire and I2C connectors
LM35 thermometer
RS232 int TxD RxD LEDs
DS1307 Real Time Clock ant 3.6V accumulator
External DataFlash memory AT45DB041 form Atmel