ProportionAir ISQB1, Инструкция по установке и обслуживанию

Страница: 11 / 11

11 ISQB1 Installation Guide - 2/13/2015 | SSS
Improper operation could result in serious injury to persons or
loss of life!
1. PRODUCT COMPATIBILITY
Proportion-Air, Inc. products and accessories are for use in
industrial pneumatic applications with compressed air
media. The compatibility of the equipment is the
responsibility of the end user. Product performance and
safety are the responsibility of the person who determined
the compatibility of the system. Also, this person is
responsible for continuously reviewing the suitability of the
products specified for the system, referencing the latest
catalog, installation manual, Safety Precautions and all
materials related to the product.
2. EMERGENCY SHUTOFF
Proportion, Inc. products cannot be used as an emergency
shutoff. A redundant safety system should be installed in
the system to prevent serious injury or loss of life.
3. EXPLOSIVE ATMOSPHERES
Products and equipment should not be used where
harmful, corrosive or explosive materials or gases are
present. Unless certified, Proportion-Air, Inc. products
cannot be used with flammable gases or in hazardous
environments.
4. AIR QUALITY
Clean, dry air is not required for Proportion-Air, Inc.
products. However, a 40 micron particulate filter is
recommended to prevent solid contamination from
entering the product.
5. TEMPERATURE
Products should be used with a media and ambient
environment inside of the specified temperature range of
32°F to 158°F. Consult factory for expanded temperature
ranges.
6. OPERATION
Only trained and certified personnel should operate
electronic and pneumatic machinery and equipment.
Electronics and pneumatics are very dangerous when
handled incorrectly. All industry standard safety guidelines
should be observed.
7. SERVICE AND MAINTENANCE
Service and maintenance of machinery and equipment
should only be handled by trained and experienced
operators. Inspection should only be performed after
safety has been confirmed. Ensure all supply pressure has
been exhausted and residual energy (compressed gas,
springs, gravity, etc.) has been released in the entire
system prior to removing equipment for service or
maintenance.
Warning
Improper operation could result in serious injury to persons or
damages to equipment!
1. PNEUMATIC CONNECTION
All pipes, pneumatic hose and tubing should be free of all
contamination, debris and chips prior to installation. Flush
pipes with compressed air to remove any loose particles.
2. THREAD SEALANT
To prevent product contamination, thread tape is not
recommended. Instead, a non-migrating thread sealant is
recommended for installation. Apply sealant a couple
threads from the end of the pipe thread to prevent
contamination.
3. ELECTRICAL CONNECTION
To prevent electronic damage, all electrical specifications
should be reviewed and all electrical connections should
be verified prior to operation.
Caution
Exemption from Liability
Warranty
1. Proportion-Air, Inc. is exempted from any damages
resulting from any operations not contained within the
catalogs and/or instruction manuals and operations
outside the range of its product specifications.
2. Proportion-Air, Inc. is exempted from any damage or loss
whatsoever caused by malfunctions of its products when
combined with other devices or software.
3. Proportion-Air, Inc. and its employees shall be exempted
from any damage or loss resulting from earthquakes, fire,
third
person actions, accidents, intentional or
unintentional operator error, product misapplication or
irregular operating conditions.
4. Proportion-Air, Inc. and its employees shall be exempted
from any damage or loss, either direct or indirect,
including consequential damage or loss, claims,
proceedings, demands, costs, expenses, judgments,
awards, loss of profits or loss of chance and any other
liability whatsoever including legal expenses and costs,
which may be suffered or incurred, whether in tort
(including negligence), contract, breach of statutory duty,
equity or otherwise.
Proportion-Air, Inc. products are warranted to the original
purchaser only against defects in material or workmanship for
one (1) year from the date of manufacture. The extent of
Proportion-Air’s liability under this warranty is limited to repair
or replacement of the defective unit at Proportion-Air’s option.
Proportion-Air shall have no liability under this warranty where
improper installation or filtration occurred.
Safety Precautions
Please read all of the following Safety Precautions before installing or operating any Proportion-Air, Inc. equipment or accessories.
To confirm safety, be sure to observe ‘ISO 4414: Pneumatic Fluid Power - General rules relating to systems’ and other safety
practices.