QUADROCOPTER DIAGRAM
REMOTE DIAGRAM
Landing Gear
Power Indicator Light
Battery Connector
Front Red LED Lights
Bottom Cover
Rotor Blade
Canopy
Rear Bright LED Lights
DO NOT FLY YOUR ZEPHYRUS IN FOUL WEATHER!
WARNING
• Verify that there are 6 “AA” batteries inside the remote control unit and the Quadrocopter has been fully charged.
• Make sure your Quadrocopter and controller are turned on.
• Make sure to be in a large space with an open radius of at least 50 feet.
• Make sure the empty space has no obstacles and river. Set your Quadrocopter on a clean flat surface before take-off.
DO NOT ATTEMPT TO FLY YOUR ZEPHYRUS IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR
LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND POSSIBLY EVEN CAUSE BODILY
HARM.
FLYING TIPS
• It is recommended that you operate the Quadrocopter in a wide space. The ideal space should have
a 200 foot radius.
• Parental guidance or adult supervision is suggested at all times.
• If you are flying the Quadrocopter with others, make sure all spectators are behind you.
• For best performance, it is recommended that you operate the Quadrocopter in zero wind conditions.
Wind can greatly affect the performance of the Quadrocopter.
PREPARING FOR FLIGHT
Your Zephyrus
™
utilizes an automatic 2.4G channel selection system that allows up to 8 people to fly
side by side in the same wireless range.
For One Person Play:
1. Before starting, make sure that the power on both your controller and Quadrocopter are in the OFF
position. Make sure that there are no other 2.4G devices in the area as well.
2. Turn ON the Quadrocopter and set it down on a flat surface. The red LED indicators inside the
Quadrocopter body should flash.
3. ON the remote , pull the throttle all the way down, then turn ON your remote. The remote will beep
in 3-5 seconds. When you hear a long beep, the red LED light should turn on. This indicates that your
Quadrocopter and remote have successfully synced. Should this not happen, repeat all steps again.
For Multi Person Play:
4. Before starting, make sure that the power on all Quadrocopters and Controllers are in the OFF
position. Make sure that there are no other 2.4G devices in the area as well.
5. Each person will have to sync their Quadrocopter individually at a different time to avoid
interference. Follow steps 1 to 3 above making sure to keep away from other people while also
making sure that no one else is syncing at the same time.
6. After syncing a players Quadrocopter, it should be left ON until all players have synced their Quadrocopters.
7. Should there be a mistake/interference, all players must turn off their controllers and Quadrocopters
and start the process all over again.
SYNCING YOUR QUADROCOPTER
Antenna
Power Indicator Light
Speed Select Button
Throttle Sensitive Trim
Throttle Control
Left-Right
Turning Trim
360˚ Stunt Rolls Button
Forward & Backward Trim
Forward & Backward Trim
Indicator
Direction Control
Power On/Off
Banking Trim
Throttle Trim Indicator
Direction Trim Indicator
Battery
Channel Mode Indicator
Banking Trim Indicator
Speed Mode Indicator
Remote Control Display
3
4
