Page 25
StormRider Trampoline Anchor Kit
Trampolines, especially those with an enclosure, are easily blown around and severely damaged by wind. It is highly
recommended that you secure your Trampoline against wind. Follow the instructions below to install your StormRider
Anchor Kit.
Step 1
- Evenly space the stakes around the perimeter of your trampoline.
Step 2
- Using a rubber mallet, pound each stake at a
45-degree angle into the ground towards the trampoline
until it is
flush with ground level.
Step 3
- Secure the straps to the frame of the trampoline by looping the strap over the frame and following back through the
buckles, then looping back up though the lower buckle. Straps should be kept tight at all times to secure the trampoline
effectively. See illustrations below.
This completes the installation of your StormRider Anchor Kit.
Warning;
The installation and use of the StormRider Anchor Kit does not guarantee that your trampoline will not be damaged by wind or other severe weather. Many
factors, such as soil types, influence the effectiveness of this product. If using this product in sandy or loose soil or in a high wind area, it is recommended you purchase
and use two anchor kits, as well as take other precautions including disassembling trampoline during times of severe weather. Using an anchor kit is not an insurance
policy and will not add additional warranty benefits to your trampoline. Propel Trampolines, including its retailers and affiliates, will not be held responsible for damages
to persons or property as a result of the failure of this product.
