14
Enclosure Assembly
Read and understand all remaining Enclosure assembly in-
structions before beginning the Enclosure assembly process.
1) Your improved safety pad comes in two pieces. Lay both pad sections
on top of the springs, with spring loops facing down (See step 3)
2) Align the brass O-rings
in pad over the upright T-
bracket holes (B)
3) Then Velcro the two ends of
the pad together.
4) In case of high wind, 6 spring
loops have been added to the bot-
tom side of your safety pad that
should be attached in addition to
the upright post Sure-Lock O-rings.
Locate each individual spring loop
and its nearest spring. Unhook
spring from frame, insert through
loop and rehook spring to frame.
Repeat this step until all spring
loops have been attached.
