5
6
8. MUTE/Limited Sound Effect Mode:
• Power on both remote control and tank.
• Hold down the Auto button continuously and press the Start/Stop button once to enter Mute Mode.
• While in the Mute Mode, sounds effects that play when your tank is running are disabled. All other operations
sounds of the tank will operate as normal.
• To reactivate the sounds, press the Start/Stop button to stop the tank. Then, after waiting for several seconds,
press the Start/Stop button to begin play in normal mode.
BATTLING OTHER LASER FORCE TANKS
Get ready for ground combat missions with your friends – or “enemies.” You can battle up to 11 additional foes
for an amazing interactive battle experience.
Note
: Requires 1 or more additional Laser Force tanks.
1. Make sure all battling Laser Force tanks are fully charged, individually synced and ready to play.
READY, AIM, FIRE!�
2. While operating your tank, aim your turret toward the front of your opponent’s tank and fire! Note: You must
have a direct line of fire towards the IR Receiver located on the front of your opponent’s tank in order to
register a “hit.”
3. If you successfully “hit” your opponent with your Cannon, one of their LED indicator lights will go out.
If firing your machine gun, you must “hit” your opponent 5 times in order to make one of their LED indicator
lights go out.
Note
: If you “hit” your opponent less than 5 times with your machine gun and then “hit” them with your
Cannon, the machine gun counter will reset to 0.
• When “hit,” your tank will shutter from the “impact” and make sounds.
• After being “hit” by your opponent’s Cannon, you will have 8 seconds to escape before being able to get
“hit” again.
• After being “hit” by your opponent’s machine gun, you will have 5 seconds to escape before being able to get
“hit” again.
• When “hit,” some functions of your tank may become disabled, just like a real tank. After 2 “hits,” (2 LED
indicator lights go out), your turret and machine gun will become disabled and will not turn.
3. THREE STRIKES YOUR OUT!� On the third direct hit, your tank will be disabled. GAME OVER!
4. After 10 seconds, the “destroyed” tank will recover (press Start/Stop button to resume) and will be ready for
the next battle. Press the Start/Stop button to get back in the game.
AUTONOMOUS MODE
The Laser Force tank has a built in Autonomous mode for a single player to battle against a computer-controlled
“enemy.”
Note
: Requires 2 Laser Force tanks.
To activate Autonomous Mode:
1. Turn on and sync each tank to their respective remote controllers.
2. Place the first tank into Autonomous mode by pressing the Auto Run button. That tank will now be operating
on it’s own.
3. Use your remote to dodge their Cannon and machine gun fire and try to “hit” them 3 times to win the game.
CHANGING THE TREADS
If the treads become damaged, contact Propel customer service. Additional treads are available for purchase.
You can replace the treads using the following steps:
1. Remove the damaged tread by gently pulling the tread from the wheel stays.
2. Place the new tread over the wheels, being careful not to use excessive force and damage the wheels or treads.
BATTERY WARNINGS
RECHARGEABLE BATTERY:
This tank uses an internal Li-Ion rechargeable battery (650 mAh). If the battery can no longer be charged,
dispose of the battery according to local disposal requirements.
The remote control requires 2 “AA” batteries (not included).
Please read the important battery safety warnings below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal Hydride).
• Do not mix old and new batteries.
�• Non-rechargeable batteries are not to be recharged.
�• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly according
to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Do not dispose batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the remote control when it is not being used for an extended period of time.
• To clean, gently wipe the remote control and tank with a clean, slightly damp cloth.
• Keep this product away from direct heat or sunlight.
• Do not submerge the tank or remote into water, as this will damage the unit beyond repair.
• Parental guidance recommended when installing, replacing, and charging the batteries.
FCC Part 15 C Notice
CAUTION
: Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.�
NOTE
: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.�
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and�
(2) this device must accept any interference received, including interference that may cause undesired operation.
