4 CHANNEL FLIGHT CONTROL
Below is a list of basic flight functions for your long-range remote control DART ™ 1.0. While learning to
fly your DART ™ 1.0 it is best to start with a large space until you get used to the basic controls. As you
master flying your DART ™ 1.0 you can move to more advanced maneuvering techniques. Practice makes
perfect! When you have these basic steps down you can move to the next level.
Move the Throttle up to increase the speed of
the motors and the DART ™ 1.0 will rise up.
Move the Throttle down to decrease the speed of
the motors and the DART ™ 1.0 will descend.
Move the Throttle stick left and the DART ™ 1.0
will rotate left.
Move the Throttle stick right and the DART ™ 1.0
will rotate right.
Move the Direction Control up and the DART ™
1.0 will move forward.
Move the Direction Control down and the DART
™ 1.0 will move backward.
Move the Direction Control left and the DART ™
1.0 will bank to the left.
Move the Direction Control right and the DART
™ 1.0 will bank to the right.
3 CHANNEL FLIGHT CONTROL
Below is a list of basic flight functions for your long-range remote control DART ™ 1.0. While learning to
fly your DART ™ 1.0 it is best to start with a large space until you get used to the basic controls. As you
master flying your DART ™ 1.0 you can move to more advanced maneuvering techniques. Practice makes
perfect! When you have these basic steps down you can move to the next level.
Move the Throttle up to increase the speed of
the motors and the DART ™ 1.0 will rise up.
Move the Throttle down to decrease the speed of
the motors and the DART ™ 1.0 will descend.
Move the Throttle stick left and the DART ™ 1.0
will rotate left.
Move the Throttle stick right and the DART ™ 1.0
will rotate right.
Move the Direction Control up and the DART ™
1.0 will move forward.
Move the Direction Control down and the DART
™ 1.0 will move backward.
7
8
D
CALIBRATE
STUNT
START/LAND
SPEED
CALIBRATING THE ZIPP DART ™ 1.0
If the DART ™ 1.0 becomes unstable during the course of flying, you may need to calibrate the internal
gyros. To do this place the DART ™ 1.0 on a flat level surface, press and hold the CALIBRATE button till you
hear a long beep.The LEDs on the DART ™ 1.0 will flash quickly and then remain solid, this indicates your
drone has been recalibrated (see diagram D).
Содержание DART 1.0
Страница 7: ......
