VoIP Phone User
’
s Manual
8 Configuration Description
The IPPHONE provides two ways to modify WEB parameters: through PC interface and
WAN interface. Below describes how to enter the WEB interface configuration parameter (refer to
Chapter 9
WEB configuration interface description
) through WAN interface (refer to Section 8.1)
8.1 WAN Configuration Environment
n
Configure the
“
TCP/IP Protocol
”
of PC according to Fig. 1 with the default IP addresses of
PC and IPPHONE LAN in the same network segment.
n
Configure the device according to Fig. 2.
n
Use straight-through cables in the figure.2
n
After configuration, input the IPPHONE default IP address in IE address bar. Each IPPHONE
will be allocated with an initial Lan IP address before delivery, assumed to be 192.168.0.200.
fig 1
