Prooff Johannes Verhuls Ninebyfour, Руководство по установке

Страница: 6 / 8

1. 2. 3.
PLEASE NOTE! Always check if the cord is securely clamped
inside bottom and top slit in the wooden pen (figure 3).
650
A.
C.
B.
D.
E.
WARNING: TO AVOID THE
RISK OF SUFFOCATION,
KEEP CORK (B) OUT OF
REACH OF SMALL CHILDREN
AND ANIMALS.
1. Drill holes at a distance of 650mm
and insert plugs into holes in wall
(not included).
2. Remove cork-stop from lamp, then
carefully remove the led tube.
3. Place the bolts through the wooden
light-fixture and optional place the
spacers (not included) over the ends
of the bolts.
4. CAUTION! Install led-tube with
printed information and L + N signs
to powered fitting and close with
cork-stop.
Adjusting the height
1. Clamp the wooden pen at the
bottom end on the cotton cord.
2. Wrap the cord around the pen
until reaching the desired height.
3. Fix the cord by clamping
the cord in the top end op the
wooden pen.
5. Levelling:
This is, and obviously so, a
natural material. It might occur
that the lamp is not perfectly
horizontal the first try. To adjust,
turn the knot in step 3. (bottom
right of this page) a half or a
quarter turn. This might take a
little tinkering.
Mounting on wall
NINEBYFOUR
11 10
PROOFF.COM