pronovost PGS-1020TRC, Руководство оператора и каталог запасных частей

Страница: 21 / 52

- 21 -
SPECIFICATIONS
99
Model PGS-1020TRC
Horse power required 100 to 150 HP
Approximate performance 950 tons imp./hour
(tractor 150 HP)
Height including telescopic chute PCT 119" retracted (approximately)
in working position 149" extended (approximately)
Height - chute base 50"
Chute rotation On UHMW, for hydraulic motor
Frame height 47 1/2"
Optional lateral blade cutting height
66" ou 78"
Working width 100 3/4"
Drum diameter 34"
Depth of drum 15"
Drum rotation On UHMW, for hydraulic motor
Drum position Centered
Drum liner 1/4" in carbon steel 450
Impeller blades 6 blades x 1/2" standard steel welded
Size and height of impeller shaft Diameter 2" - Height 22"
Impeller speed 540 RPM (CW)
P.T.O. speed required 540 RPM (CW) or 1000 RPM (CW) optional
Speed reducer Optional: 1000/555RPM-200 HP or 220 HP
Height of speed reducer shaft 14" or 30" (with reducer 150 HP)
Standard P.T.O. shaft No. 9 (T90) choice of yoke as required
Optional P.T.O. shaft No. 9 multilobe (V90) choice of yoke as required
Lower auger Dual band, bolted, 34" diameter, toothed auger
Upper auger Not available
Drive chain RENOLD No. 100HV in oil bath
Shear bolt 1 for the im 1 for auger
Scraper Standard steel 1/2" x 4" rev. Standard
blade Carbon steel 1/2" x 4" rev. Optional
Carbon steel 6" x 1/2" sharpened Optional
Stainless steel 1/2" x 4" rev. Optional
Skid Standard steel (quick adjust) Standard (2 quick adjust skid shoes)
shoes Carbon steel (quick adjust) Optional (2 quick adjust skid shoes)
Stainless steel (quick adjust) Optional (2 quick adjust skid shoes)
Rocktec (quick adjust) Optional (2 quick adjust skid shoes)
3-point hitch Category 2
Frame: sides Plate 1/4"
Frame: back Plate10 Gauge
Center of gravity from 3-pt hitch at its shortest 44"
Rotational force (reference) 169 180 lbs-po
Weight (with télescopic chute) 3 845 lbs (without reducer)
Design and specifications subject to change without notice.