1. When first powering-up the product, keep the amplifier gain controls all the way off, in order to prevent from being
potentially damaged and from producing annoyed sounds caused by defective cables or hookups. When turning
up gain control, do it gradually, until normal operation is verified. These precautions are necessary for all speaker
system with high power amplifiers, since they have enough power to blow most speakers in abnormal situations.
2. Check the AC Voltage before connectiong the AC plug.
PRECAUTIONS
PANEL DESCRIPTION
1. MAIN INPUT
This is female XLR-type
connector that accept a
balanced line-level signal
from a mixing console
or other signal source.
2. THRU
(FULL RANGE OUTPUT)
This is connector that produces
exactly the same signal that is
connected to the MAIN INPUT
jack. Use it to daisy-chain
several active system together
of the same signal source.
4. MIC. GAIN
This adjusts the MIC. Level.
3. MIC. / LINE INPUT
This is XLR-type for Mic. Inputs, as well as 1 /4
TRS (tip-ring sleeve) input jack.
5. EQ CONTROL
To adjust the EQ control for setting the balance of
system.
6. TAPE IN
Signal in for CD-Player, PC-Computer,MP-3 Player
7. TAPE GAIN
Adjusts the TAPE level.
8. MASTER VOLUME
This knob adjusts all signal input or Mic level.
9. PEAK INDICATOR
The PEAK indicator built to prevent the amplifier
outputs from over driving the transducers.
10. EXTERNAL OUT
This external out speakon is connector for another
passive system which should be above 8
.
11. LOW CUT SWITCH
Use this switch, you can balance this system as a
Mid-High by Low Cut Switch on. As a full range
system, the switch should be off.
12. POWER SWITCH
Use this switch to turn the system on and off. Make
sure the signal source s level control is turned down
before you turn it on.
13. POWER
This is where you connect the AC linecord to provide
AC power. Plug the linecord into an AC socket properly
configured for your particular model.
14. FUSE HOLDER
When occur a problem on this appliance, the fuse will
be cut off power to prevent from a problem. To replace,
use standard fuse as specified on this appliance.
