7
Operation
1. POWER ON: Once you have made all the equipment connections to your mixer,
press the POWER SWITCH (12). The power will turn on and the POWER LED (21)
will glow RED.
2. CHANNEL 1: The PHONO/LINE SWITCH (4) allows you to select the PHONO
1/LINE 1 (16) jack to input phono or line level. The CHANNEL SLIDE (5) controls
the input level of this channel.
3. CHANNEL 2: PHONO/LINE SWITCH (6) allows you to select the PHONO 2/LINE
2 (17) jack to input phono or line level. The CHANNEL SLIDE (7) controls the input
level of this channel.
4. CHANNEL 3: The CHANNEL SLIDE (9) controls the input level of this channel.
5. CROSSFADER: The CROSSFADER (10) allows you to mix the sources 1/2 into
each another.
6. TALKOVER SWITCH (3) The purpose of the talkover section is to allow the
program playing to be muted so that the mic can be heard above the music
.
When
you press the TALKOVER SWITCH, the talkover will be On and the volume of all
sources are lowered by 12 dB, except the Mic inputs.
7. The CUE (1) allow users to select the CH1 or CH2 to PHONE output or they can
be mixed. The The Micro volume knob (2) allows you to control the level of MIC.
8. The STEREO MONO SWITCH (8) allows users to select stereo or mono inputs.
9. OUTPUT-METER: The OUTPUT-METER (13) indicates either the MASTER output
left and right levels.
SPECIFICATIONS
MIC sensitivity…………………………….……….1.5 mV (10 K ohms)
PHONO sensitivity……………………………………3mV (47 K ohms)
LINE/CD sensitivity………………………………..150 mV (22 K ohms)
MASTER OUTPUT………………………..nominal 775 mV MAX 1.5 V
Frequency Response…………………20Hz-20KHz ±2dB (RIAA±2dB)
Talkover Attenuation……………………………………………….
－
12dB
Headphone output………………………………………300mV/8/16 ohms
