TP-3040
Detailed safety instructions for assembly and use
Please take care when setting up and using the tripod. It has various folding
mechanisms and hinges and can cause injuries if it is
assembled/disassembled improperly.
Please note that the tripod can also fall over if it is jostled or set up
improperly. Children or people standing or sitting in the direction of the fall
can be injured.
Do not leave children unattended. The product is not a toy and must not be
used for climbing or similar purposes. There is a risk of injury if the stand tips
over.
When assembling, make sure that all screws and wing screws are
appropriately tightened to ensure a stable stand and safe loading capacity.
To secure the height adjustability of the stand tubes, a safety cotter pin is
attached to the stand. Please make sure to use and insert it as shown in fig.
4-1 of the assembly diagram.
Depending on your preference or the dimensions of your notebook or
projector, the holding plate (A) can be screwed to the 4-hole holding panel in
portrait or landscape format, thus enabling ideal tilt/angle settings.
The maximum load capacity of the stand is 15 kg. Use with heavier
equipment may cause the stand to break, collapse or fall over.
If you want to use the product as a flatscreen stand, leave out the plate (A)
and screw your screen to the 4-hole holding plate (see fig. 2b). Please also
pay attention to the maximum weight (max. 15 kg) and size of the screen. A
maximum of 32-inch displays may be attached. In addition, make sure that
the fixing device on the back of your screen matches the hole of the holding
panel on the stand. You may need adapter brackets, which are not included
in the delivery. The TP-30 stand supports VESA 75x75 and 100x100.
Before using the stand, be sure to check its stability and support. Make full
use of the span of the tripod struts to achieve maximum stability. Optimally
align the legs to prevent the stand from tipping and falling over.
