PRONAR T682, Руководство пользователя

Страница: 77 / 131

SECTION 4 Pronar T682, T682/1
4.13
Bulk materials
Loading bulk materials is normally conducted with the use of loaders or conveyors and
possibly loading manually. Do not load bulk materials to a height greater than that of side
walls or extensions. On completion of loading, the load should be evenly spread over the
whole surface of the load box.
Oilseed rape or seeds of other plants of very small size or powder materials can be
transported provided the load box is properly sealed in places where gaps are bigger than
the seed diameter or other carried material. Profiled rubber seals, silicone sealers, plastic
wrap, rope or textile materials are recommended materials to provide sealing of the load box.
Additionally it is essential to protect load with tarpaulin cover. It protects the load against
spilling during travel, being blown away by the wind and also protects load against moisture,
which is particularly dangerous in the case of bulk materials. They may absorb a significant
amount of water, which may increase the bulk of the load during travel. In extreme cases the
gross weight of the trailer may exceed the permissible vehicle gross weight.
Some bulk loads (e.g. building materials, such as gravel or slag) may cause more rapid
damage to paintwork.
Loads of pieces or solid lumps
Chunky loads or can cause dents on the floor or walls and abrasion of the paint coating. In
order to protect it, lay thick plywood, hard particle board, thick planks or other materials of
similar properties on the load box platform and possibly on walls and wall extensions. Non-
compliance with the instructions provided could invalidate the warranty. Loading of material in
pieces or solid lumps must be from a low height. The load must not fall with great force on
the floor of the load box, even if it is protected.