5
BASIC OPERATIONS
Switching the Varitilt ON
Mains Powered
1. Make sure the rocker switch on the back of the unit is switched
off, as well as switching off the power sockets on the wall before
plugging the power cables into them.
2. Plug the power cable into the back of the unit, then into the wall
socket and switch both switches on.
Battery Powered
(only applicable if you have a battery unit)
1. Make sure the rocker switch on the back of the unit is switched
off, and the battery is powered off, before plugging any cables
into them.
2. Plug the power cable into the back of the unit, then into the
battery (the socket for the battery is located under the cover
labeled 'AC').
3. Switch on both the unit and the battery via the rocker switches.
4. Press the battery power button once (this should switch on some
blue lights next to the button, these indicate the battery’s
charge). Once these lights show, press and hold the power
button, this will switch the battery on.
The screen will automatically turn on once the unit has been powered.
