prompt-it maxi, Быстрый старт

Страница: 10 / 12

Your
prompt-it ® maxi
comes with a beamsplitter glass cleaning
kit. To ensure your beamsplitter glass stays clear, it will need to be
carefully and regularly cleaned.
•
NEVER use ammonia-based cleaning agents, strong alkalis, acids,
detergents with fluoride or solvents on your glass as they can
damage the special coating.
•
Always use a soft, lint-free cloth to wipe any spots.
•
Keep the glass spot-free & dry. Spots will stain the special
coating. If any liquid falls on the glass, clean it off immediately.
Otherwise you will end up with dirty circles on your glass.
•
Clean the glass after every use. This ensures it is clean and
doesn’t end up with stains.
•
Don’t handle with greasy or dirty fingers.
Always keep the beamsplitter glass in a dry and UV-protected
environment. We strongly recommend you keep the beamsplitter
glass in the supplied black protective sleeve whenever it is not in use.
It is not recommended to put any kind of stickers on the beamsplitter
glass because you can damage the coating when removing the
sticker.
CARE & MAINTENANCE
BEAMSPLITTER GLASS
1. Place it on a soft surface. You can use the glare cover provided in
the prompt-it
®
maxi kit.
2. Take the ammonia-free spray bottle from the cleaning kit and spray
once or twice on the beamsplitter glass. Using the squeegee, push
backwards and forwards, up and down the glass to clean it. Make
sure that the surface is completely dry before cleaning the other
side of the glass.
3. Lay the black beamsplitter glass sleeve next to the beamsplitter
glass and slide the beamsplitter glass back in the sleeve, carefully,
without putting fingerprints back on the glass.
prompt-it
®
maxi BASE
The prompt-it ® maxi base is made from high-quality hard plastic.
This can be cleaned with a damp cloth. Use soft soap or detergent if
needed. Ensure that the base is completely dry before use.
prompt-it ®
GLARE COVER
The
prompt-it ®
glare cover is made of cotton and if needed, should
be gently hand-washed in cold water only, using a soft detergent. Air
dry only – do not tumble dry.
BEAMSPLITTER GLASS CLEANING INSTRUCTIONS
10