promotal 118 Series, Руководство пользователя

Страница: 10 / 32

Cleaning protocol
10 User’s Guide
Stainless steel products
Cleaning and Maintenance : For maintenance
of stainless steel products, periodic cleaning of the
surface is suffi cient. This operation is necessary
to keep the products clean, but is facilitated by the
quality of stainless steel surfaces. A large range of
products and cleaning methods may be used. The
choice products method will depend on the nature
of the marks or on the product content, and on the
conditions of use of the stainless steel elements.
Cleaning agents
a)
Detergent - washing liquids : All types of
detergents, washing liquids and commercial soaps
may be used, provided they do not contain any
chlorine products.
b) Abrasive powders : These products may scratch
the stainless steel surface, thereby changing the way
its appearance. They should therefore not be used.
c) Solvent : May be useful in getting rid of grease
marks. The usual solvents (benzene, methylene
chloride, white spirits etc.) as well as domestic or
specially prepared industrial products may be used.
Naturally their use requires certain precautions
to be taken because of their flammable and toxic
properties. Precautions must also be taken to avoid
damaging adjacent materials which may be sensitive
to their chemical action (paints, mastics, joints etc.).
d) Acid products : Vinegar (acetic acid) may be
used to get rid of stains made by calcium deposits.
Its contact with the surfaces must be of a very
limited duration, and the surface must then be
thoroughly and carefully rinsed with clean water.
The use of chlorine based products could damage
this equipment.
e) Bases : Not recommended.
Others : The use of steel wool or metal sponges
could damage the surfaces of the products.
Chrome fi nished products
Cleaning and Maintenance : It is through important, in order not to damage this protective coating,
abrasive and / or corrosive products the use of. The use of commercial cleaning products, such as window
cleaning products, are safe for chrome coated surfaces. If necessary, an appropriate disinfectant may be used
on chrome (make sure the instructions are followed).
PVC and ABS products
Cleaning and Maintenance : The use of commercial cleaning products, such as window cleaning products,
are safe for PVC and ABS surfaces. To restore up an old or dull surface, plastic restorer products may be used.
Please note that the use of any solvants or any abrasive products is could damage these surfaces.
Laminated elements
Cleaning and Maintenance : As for PVC. Use window cleaning products.
Imitation leather coverings
Use a damp cloth and soapy water (eg. household
soap). For stubborn stains, dab, but do not rub,
using a cloth soaked in white spirits or in a solution
of water and alcohol (less than 30 % strength).
It is not recommended to use the following : Pure
alcohol, acetone, perchlorethylene, trichlorethylene,
all solvants and detergents, any abrasive cleaning
agents, any kind of wax.
Flame retardort classifi cation : All our coverings
class are M2 or M1. We can provide you with a
manufacturers certifi cate on request.