10
1.7
Visual inspection
џ
Produce inspection of the main units before each run. Make sure all
items are in working order and able to properly perform the
required functions. In case of damage of any part, the further
operation of the robot is not allowed.
џ
Do not use surrogate lock, for example by linking the robot to a
static object, block the wheels of the robot or lifting it into the air.
џ
Surface of robot incorporating elements must be clean, dry and
non-greasy.
џ
If damage is found, contact the service center.
1.8
Safety
џ
Observe all safety regulations.
џ
When using the robot Promobot, observe the general rules for the
safe use of electrical appliances.
џ
Rotating wheels can cause injury. Avoid touching wheels with your
limbs during rotation.
џ
Robotic arm may cause injury during operation. Do not touch
hands-manipulators while they move.
1.9
Electrical safety
џ
During and after its end, before the maintenance, repair, storage or
charge of batteries, remove the plug from the socket.
џ
Watch out for voltage of the electrical network during the battery
charge. Electrical parameters must match the voltage of 220V at a
frequency of 50-60 Hz.
1. BASIC PARAMETERS
