Promise Atlas S8+, Руководство пользователя

Страница: 26 / 29

19
Hardware Installation and Initial Setup Product Manual
1. To Reset network settings to factory default : Press and hold the reset button on the rear
panel for 3 seconds, a short beep sound for 1 second will be heard. The administrator password
and all the network settings will be reset, the system configuration will result in:
• Reset Admin password to the default value: password.
• All networking set to “DHCP”.
• All data service ports set to default setting (All data service enable and set to default port).
• VLAN will be terminated.
• Port trunking will be disabling.
• After configs are deleted, restart the Atlas S8+.
• Log out Promise Cloud.
• DNS settings.
• DDNS and UPNP settings.
2. To Reset all settings to factory default : Press and hold the reset button on the rear panel
for 10 seconds, you will hear a short beep sound at the third second and a long beep sound at
the tenth second. The operating system (including reset the administrator password and all the
network settings) will be reinstalled, the system configuration will result in:
• Reset all network settings to factory default.
• Reset all system settings to factory default.
• All accounts, groups, folder permission, and ACL are deleted.
• Access control lists are all deleted.
• All backup tasks are deleted.
• Cloud sync job delete.
• AntiVirus setting are deleted.
• Media Library index will be deleted.
• After configs are deleted, restart the Atlas S8+.
• Log out Promise Cloud.
Note
‘Reset network settings to factory default’ and ‘Reset all settings to factory default’
using the Reset button do not affect data stored on the hard disks.