Promise Technology Vess A Series Скачать руководство пользователя страница 101

Страница: 101 / 259

Managing with WebPAM PROe

Vess A6120 Product Manual

• Write Cache [

Enabled/Disabled

]

• Read Look Ahead Cache

[

Enabled/Disabled

]

• SMART Feature Set

• SMART Self Test

• SMART Error Logging

• Command Queuing Support

• Command Queuing [

Enabled/Disabled

]

• Queue Depth

• Maximum Multiple DMA Mode Supported

• Maximum Ultra DMA Mode Supported

• DMA Mode

• Drive Temperature [C°/F°]

• Reference Drive Temperature

• Power Saving Mode

ISk

rrayS

and

ogIcal

rIVeS

Disk arrays and logical drives are created and managed using the

Disk Arrays

menu. Use the Array

Configuration menu to view the Disk Array List, and to create and delete disk arrays on the enclosure. Expand

the Disk Arrays icon in Tree View to view menu links for existing arrays. Each array icon can be expanded again

to see the Logical Drives icon, and this can be expanded to see each logical drive icon.

For a detailed description of how to create disk arrays and logical drives using WebPAM PROe, please refer to

the Quick Start Guide.

Use the top-level Disk Arrays menu to view the

Disk Array List

, to delete existing arrays, and to create

new disk arrays using the Automatic, Express, or Advanced disk array creation menus. Note that there must be

physical drives available in order to use any of the disk array creation menus.

View information for existing disk arrays by clicking on the icon in Tree View or the array name in the Disk Array

List. Each individual array menu is used to create and delete logical drives, to change settings (Alias and enable/

disable PDM, Media Patrol and Power Management) for the array, or to start Background Activities including PDM,

Rebuild and Transition.

Individual Disk Array menu

Содержание Vess A Series



































































































































































































































































Результаты поиска

Содержание Vess A Series

Отзывы:

Похожие инструкции для Vess A Series

Бренды по названию

Популярные бренды

Promise Technology Vess A Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess A Series

Отзывы:

Похожие инструкции для Vess A Series

Бренды по названию

Популярные бренды