Promise Technology Pegasus R4 Скачать руководство пользователя страница 70

Страница: 70 / 148

Pegasus R6, R4 Product Manual

•

If you want the Promise Utility to format your logical drives, leave the

Format

box checked.

For additional format options, see “Formatting Logical Drives” on
page 90.

Click the

Add

button.

The new logical drive appears on the list at the right.

If there is capacity remaining, you can create an additional logical drive.

Pegasus supports up to 32 logical drives.

When you are finished, click the

Submit

button.

The new logical drive or drives appear in the logical drive list.

Formatting your Logical Drives

If you left the

Format

box checked when you created your logical drives, they are

formatted automatically.

If you UNchecked the

Format

box, you must format your logical drives manually.

See “Formatting Logical Drives” on page 90.

When the Promise Utility has finished the format operation, new
removable-drive icons, each representing one logical drive, appear
on your desktop (right).

When you see the icon, your logical drive is ready to use.

Your logical drives are ready to use.

Locating a Logical Drive

This feature causes the drive carrier LEDs to flash for one minute to assist you in
locating the physical drives that make up this logical drive.

To locate a logical drive:

Click the

Storage

tab.

Click the

Logical Drive

icon.

The list of logical drives appears.

Mouse-over and click the logical drive you want then click the

Locate

button.

The Drive Power/Status LEDs for the physical drives that make up the
logical drive blink blue and orange for one minute.

Содержание Pegasus R4





















































































































































Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды

Promise Technology Pegasus R4, Руководство по эксплуатации продукта

Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды