Promise Technology Pegasus R4 Скачать руководство пользователя страница 46

Страница: 46 / 148

Pegasus R6, R4 Product Manual

Managing Physical Drives

Physical drive management includes:

•

Viewing a List of Physical Drives (below)

•

Viewing Physical Drive Information (page 38)

•

Viewing Physical Drive SMART Log Information (page 40)

•

Locating a Physical Drive (page 41)

•

Making Global Physical Drive Settings (page 41)

•

Making Individual Physical Drive Settings (page 42)

•

Making Physical Drive SMART Log Settings (page 42)

•

Clearing a Stale or a PFA Condition (page 43)

•

Forcing a Physical Drive Offline (page 43)

Also see “Physical Drive Problems” on page 106.

Viewing a List of Physical Drives

To view a list of physical drives in the Pegasus unit, do one of the following
actions:

•

Click the

Physical Drive

icon.

•

From the Device menu, choose

Physical Drive

Physical drive information includes:

•

– ID number of the physical drive

•

Status

–

= Normal.

= Stale or PFA.

= Dead.

•

Model

– Make and model of the drive

•

Type

– SATA, HDD or SSD

•

Location

– Enclosure number and slot number

•

Configuration

– Array number and sequence number, spare number,

unconfigured, or stale configuration

•

Capacity

– In GB

Viewing Physical Drive Information

To view physical drive information:

Do one of the following actions:

•

Click the

Physical Drive

icon.

•

From the Device menu, choose

Physical Drive

Mouse-over and click the physical drive you want then click the

View

button.

Physical drive information includes:

Содержание Pegasus R4





















































































































































Результаты поиска

Содержание Pegasus R4

Отзывы:

Promise Technology Pegasus R4, Руководство по эксплуатации продукта, Страница: 46 / 148

Результаты поиска

Содержание Pegasus R4

Отзывы: