FastTrak S150 TX4
8
FastBuild (tm) Utility 2.xx
(c) 2002-2005 Promise Technology, Inc.
[Auto Setup Options Menu]
Optimize Array for:
Performance
[ Auto Setup Configuration ]
Mode ....................................................................... Stripe
Spare
Drive ............................................................. 0
Drives used in Array ................................................ 2
Array Disk Capacity................................................. 160048
[ Keys Available ]
[
↑
] Up [
↓
] Down [
←
,
→
, Space] Change Option [ESC] Exit [Ctrl-Y] Save
Creating a Performance Array
FastTrak S150 TX4 enables you to create striped or mirrored arrays with 1, 2, 3,
or 4 drives.
To create an array for best performance, follow these steps:
1. Press the Spacebar to choose
Performance
under the Optimize Array for
section.
2. Press Ctrl-Y to Save and create the array.
3. Reboot your system.
4. Once the array has been created, you will need to FDISK and format the
array as if it were a new single hard drive.
5. Once the arrayed drives have been formatted, proceed to Chapter 4 of the
User Manual
on the software CD to install your operating system and/or
FastTrak driver.
