2
1
A2665
Fig. 5: Operating the pump
1.
Fix the barrel threaded connector (2) to the barrel. Insert the
pump into the liquid.
2.
Check whether the manual lever of the pump nozzle returns
automatically to its starting position.
ð
Never switch the pump on should this not be the case, as
the pumping process could not therefore be regulated.
3.
Compare the operating voltage observed with the data on the
nameplate.
4.
Before plugging in the mains plug, turn the On/Off switch (1)
to "0".
5.
Insert the mains plug.
ð
The pump is now ready for operation.
6.
Use the On/Off switch to switch on the pump.
7.
Press the pump nozzle's manual lever to pump the medium.
Measures after use
Drain the pump, hose and fittings after each use.
Allow the pump nozzle to drain in a controlled
manner after filling, as there can still be liquid in
the outlet tube, which would otherwise flow out in
an uncontrolled manner.
Operation
17
